Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the "Service" light on a Toyota RAV4?

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Service warning light

To reset the "Service" light on a Toyota RAV4, turn on the dashboard without starting the engine. Use the buttons on the steering wheel, specifically the "Menu" or "Settings" button, to access the onboard computer. Once the menu is open, scroll with the directional arrows until you find the "Maintenance" or "Service Intervals" section. From here, select the option to reset the maintenance interval and confirm by pressing the central button. You may need to hold it down for a few seconds to confirm the process. The display will indicate that the reset has been completed and the "Service" light should turn off, indicating the update of the service interval. To verify that the reset has been done correctly, turn off and on the dashboard. If the light does not turn back on, the operation was successful.

Posted on 29 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Toyota Rav 4 (2019-2026 / Xa50, MK 5) To reset the "Service" light on a Toyota RAV4, start by turning on the instrument panel without starting the engine. Use the buttons on the steering …
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To reset the "Service" light on a Toyota RAV4, you can use the buttons on the steering wheel to access the settings menu. Once in the menu, look for …
Toyota Rav 4 (2013-2018 / MK 4, Xa40) You can clear the Service light displayed on the instrument panel of the Toyota RAV4 by turning on the ignition and then pressing the button to acces…

Other guides you may be interested in

    Frequently Asked Questions

    • Rav 4 2000-2006 - What does the oil light of the Toyota RAV4 indicate? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos