Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Disassemble the clock display with attached stereo on a Toyota Aygo

Toyota Aygo - Video tutorial

Model: Toyota Aygo Ab10, MK 1 - Years 2005-2014
Part: Dashboard
Operation: Disassemble the clock display with attached stereo on a Toyota Aygo

How to disassemble the clock display with stereo attached on a Toyota Aygo? Let's see carefully in this video how to perform the disassembly. With a plastic or metal lever, we remove the plastic knob placed at the bottom of the stereo. With a screwdriver unscrew the fastening screw of the dashboard, then remove the central dashboard with a lever. We remove the car radio, being careful not to damage the wiring of the lighting of the ventilation buttons and the cigarette lighter (disconnect the power supply terminals and the antenna cable). To replace the clock display, unscrew the locking screws on the previously removed dashboard with a screwdriver. Finally, we reassemble the dashboard with all the attached pieces, proceeding backwards.


Posted on 12 October 2023 by ScegliAuto



How to disassemble the Toyota Aygo stereo
Toyota Aygo (2014-2023 / MK 2, Ab40) Let's see in this guide the steps that will allow us to disassemble the Toyota Aygo stock car stereo, in simple and quick steps. First we get on boar
How to change the time on a Toyota Aygo
Toyota Aygo (2005-2014 / Ab10, MK 1) Thanks to this very short video guide, let's see how to adjust the time on a first generation Toyota Aygo, a model in production from 2005 to 2014. S
How do you set the clock on the Toyota Aygo?
Toyota Aygo (2005-2014 / Ab10, MK 1) To set the clock on the Toyota Aygo, you need to turn on the instrument panel by turning the key inside the ignition switch: this will give you acces

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos