Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Cabin air filter

In this video, we will see how to remove the glove compartment in a Toyota Yaris. Open the glove compartment and detach the end stop arms (if present), then use a screwdriver to unscrew the securing screws (if available). After completing the previous steps, release the side plastic clips of the glove compartment and pull it out from the dashboard, disconnect any power cables, and remove the glove compartment from the dashboard. Extract the air filter and fit a new one. Reassemble all components of the glove compartment as you disassembled them earlier.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Toyota Yaris
How to replace the cabin air filter of the Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) These brief and simple instructions will show us how to disassemble and replace the cabin air filter or pollen filter of the Toyota Yaris. First of a…
How do you change the pollen filter on a Toyota Yaris MK2?
How do you change the pollen filter on a Toyota Yaris MK2?
Toyota Yaris (2005-2011 / Xp90) In this video we see how easy it is to change the pollen filter of a Toyota Yaris MK2: the filter is located behind the glove compartment, so it need…
How to Replace the Cabin Air Filter on a Toyota Yaris
How to Replace the Cabin Air Filter on a Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) In a few simple steps, we will see how to replace the cabin air filter or pollen filter on a Toyota Yaris. First, get inside the vehicle on the passe…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos