Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the interior lights of a Toyota Corolla

Model: Toyota Corolla MK 4, E170, E160 - Years 2013-2019
Part: Interior dome light bulb

In this video, we see how to replace the interior lights of a Toyota Corolla with LED bulbs: we just need to pry with a plastic spatula on the back of the overhead light, in order to remove it using our fingers, without putting pressure on the clips, which are instead located on the front of the overhead light, as highlighted in the video. Always using the plastic spatula, we pry on the sides of the transparent part to detach it from its housing. We use gloves to remove the incandescent bulb, as it will likely be hot; this will make it easier for us to place the new LED bulbs in its place, which should not be touched with bare hands. We put the transparent parts back in place and then snap the overhead light back into place. We will repeat the same operation for the vanity mirror on the passenger side visor, and for the overhead light in the rear of the vehicle that illuminates the rear seats. We will also not overlook the light inside the trunk, following the same instructions.

Posted on 14 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota Corolla (2006-2013 / MK 3) In this video, you will discover how to replace the interior dome light bulbs on the third series Toyota Corolla, as well as on the Auris. First, get…
Toyota Corolla (2006-2013 / MK 3) Here are the instructions for removing and replacing the rear light bulbs of the Toyota Corolla. First, open the boot lid and start removing the side…
Toyota Corolla (2006-2013 / MK 3) In this tutorial, we can see how to replace the rear light bulbs in the Toyota Corolla, a very simple and quick operation. First of all, make sure th…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos