Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the timing chain of the Toyota RAV 4 VVT-I

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Checks and maintenance

See other generations:
Video tutorial

In this guide we will see the main instructions that will allow us to adjust the timing chain of the Toyota RAV 4 with VVT-I engine code 1AZ FE. After disassembling and replacing the engine timing chain, it is necessary to perform the subsequent timing; raising the car we see the reference located on the lower part of the engine block, near the crankshaft.

We have a second signal on the camshaft and its pulley, which must therefore match with the chain and references; we then reassemble the chain tensioner to time the engine.


Posted on 24 January 2025 by ScegliAuto


Related tutorials

How to Adjust the Timing Chain of the Toyota RAV 4 VVT-i
How to Adjust the Timing Chain of the Toyota RAV 4 VVT-i
Toyota Rav 4 (2000-2006 / MK 2, Xa20) In today's video, you will learn how to correctly adjust the timing chain and set the timing of the Toyota RAV 4 VVT-i engine. This adjustment is dem…
How and When to Replace the Timing Chain on the Toyota RAV 4
How and When to Replace the Timing Chain on the Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Below, you will find the necessary information on how and when to replace the timing chain on the Toyota RAV 4; generally, it should be replaced arou…
How to replace the timing chain on a Toyota RAV4?
How to replace the timing chain on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) On the Toyota RAV4, replacing the timing chain involves lifting the vehicle with a jack or ramp to completely remove the right front wheel and the co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos