Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Clutch on a Yaris 1.0 Year 2001

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Clutch

If you notice that the vehicle struggles to engage during start-off or acceleration, it means the clutch disc is worn and slipping, failing to transmit torque from the engine to the wheels through the gearbox. Replacing the clutch is not typically a DIY task, but if you have some experience, you can attempt it. It is absolutely essential to ensure perfect alignment of the new disc during installation. Start by disconnecting the gear cables and the clutch actuator, then remove the driveshaft and detach the gearbox from the engine. Once you reach the clutch housing, proceed with the disassembly and replacement.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance System on a 2008 Yaris
How to Reset the Maintenance System on a 2008 Yaris
Toyota Yaris (2020-2026 / MK 4) In this video, you will learn how to reset the maintenance system on a 2008 Yaris. Turn on the instrument panel by placing the key in position 1 (tha…
How to Remove the Centre Brake Light on Yaris
How to Remove the Centre Brake Light on Yaris
Toyota Yaris (1999-2005 / Xp10) Removing the third brake light on the Yaris? Here’s how to do it. Open the tailgate, and remove the plastic covering the rear light. Unscrew the reta…
Removing Starter Motor on Yaris
Removing Starter Motor on Yaris
Toyota Yaris (2005-2011 / Xp90) Let's see how to remove the starter motor on a Yaris. Remove the starter motor from inside the engine compartment (front compartment). Disconnect the…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - How much does the Toyota Yaris clutch cost? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos