Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate and deactivate the traction control of the Toyota RAV4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

These short and simple steps will show us how to activate and deactivate the traction control of the Toyota RAV 4, following the instructions below. First of all, we get on board the car and start turning on the dashboard and the engine; normally the traction control is always active when the engine is first turned on and it can be deactivated by pressing the button located at the top of the dashboard, as shown in the video.

When the traction control is deactivated, the warning light will appear on the dashboard; it can be reactivated by pressing the same button.


Posted on 9 March 2025 by ScegliAuto


Related tutorials

How to deactivate the traction control on the Toyota RAV 4?
How to deactivate the traction control on the Toyota RAV 4?
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To deactivate the traction control on the Toyota RAV 4, turn on the ignition by rotating the key in the ignition switch: once the dashboard lights up…
How to Enable and Disable Traction Control on a Toyota Rav 4 MK4
How to Enable and Disable Traction Control on a Toyota Rav 4 MK4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To enable or disable traction control on a Toyota Rav-4 MK4, look at the panel above the radio and press the button located in the central console, w…
How to Disable Traction Control on the Toyota RAV 4
How to Disable Traction Control on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Today's steps will show you how to disable traction control on the Toyota RAV 4, following the instructions below. First, get inside the vehicle and …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos