Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Diesel filter warning light on the Toyota HiLux

Model: Toyota HiLux MK 8, An130, An120 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Warning light – error code

See other generations:
Video tutorial

In this video we can see a simple and effective system for resetting the diesel filter light of the Toyota HiLux: we open the front hood and go to the filter: here we find on the diesel filter cap, a connecting tab. We disconnect it gently and leave it next to the filter.

With this connector disconnected, we go to the driver's seat and turn on the instrument panel, count to fifteen and, always with the control panel on, we can reattach the connector to its place.

We then return to the driver's seat and verify that the filter light has turned off.


Posted on 6 May 2025 by ScegliAuto


Related tutorials

How to Reset the AdBlue Warning Light on a Toyota Hilux?
How to Reset the AdBlue Warning Light on a Toyota Hilux?
Toyota HiLux (2015-2024 / MK 8, An130, An120) To reset the AdBlue warning light on a Toyota Hilux, you need to refill the additive liquid by adding the necessary amount into the designated tank: …
How to Reset the Fuel Filter Change Light on a Toyota Hilux
How to Reset the Fuel Filter Change Light on a Toyota Hilux
Toyota HiLux (2015-2024 / MK 8, An130, An120) These simple steps will show you how to reset the fuel filter change light on a Toyota Hilux. First, get in the vehicle and turn on the ignition; the…
How to Reset the AdBlue Warning Light on a Toyota Hilux?
How to Reset the AdBlue Warning Light on a Toyota Hilux?
Toyota HiLux (2015-2024 / MK 8, An130, An120) To reset the AdBlue warning light on a Toyota Hilux, you need to refill the tank with the necessary amount of additive fluid. Open the hood and locat…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos