Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light on a Toyota Hilux?

Model: Toyota HiLux An130, An120, MK 8 - Years 2015-2024
Part: AdBlue warning light

To reset the AdBlue warning light on a Toyota Hilux, you need to refill the additive liquid by adding the necessary amount into the designated tank: this tank is located under the hood and can be accessed by opening the hood. The tank will be on the right side of the engine block, and you can refill it by removing the blue cap: once the cap is removed, you can add the required amount of liquid and close the cap. Then, turn on the ignition to check that the warning light has been cleared.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the AdBlue Warning Light on a Toyota Hilux?
How to Reset the AdBlue Warning Light on a Toyota Hilux?
Toyota HiLux (2015-2024 / An130, An120, MK 8) To reset the AdBlue warning light on a Toyota Hilux, you need to add the necessary amount of additive fluid into the corresponding tank. First, open …
How to Reset the AdBlue Light on a Toyota Hilux?
How to Reset the AdBlue Light on a Toyota Hilux?
Toyota HiLux (2015-2024 / An130, An120, MK 8) When the AdBlue light appears on the instrument cluster of the Toyota Hilux, it means that the additive fluid in the tank is almost depleted. You can…
How to check the AdBlue level and reset the warning on the Toyota Hilux
How to check the AdBlue level and reset the warning on the Toyota Hilux
Toyota HiLux (2015-2024 / An130, An120, MK 8) These short and simple steps will show us the information regarding the level of AdBlue liquid and how to reset the refill warning on the Toyota Hilu…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos