Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the air pressure sensor in the Toyota Yaris?

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Checks and maintenance

In this tutorial we can see how to replace the air pressure sensor in the Toyota Yaris, an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then open the hood and locate the sensor in question, located right on the air filter box positioned in front of the battery. Next, disconnect the power connector, unscrew the two fixing screws with a simple Phillips screwdriver and remove the sensor from the housing. At this point, all that remains is to insert the replacement and reassemble everything following the reverse procedure.

Posted on 29 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (1999-2005 / Xp10) To clean the MAF sensor of the Toyota Yaris, we open the front hood, release the metal clips of the air filter cover and remove it. Using a socket wr…
Toyota Yaris (1999-2005 / Xp10) In this video we can see where the airbag collision sensor of the Toyota Yaris XP10 is located. The collision sensor is a fundamental component of a …
Toyota Yaris (2020-2026 / MK 4) When the pressure in your tyres drops or you replace them, the tyre pressure sensor light will appear on the dashboard of your 2020 Toyota Yaris Hybr…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer
    • Yaris 2005-2011 - Where is the 2010 Toyota Yaris jack located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos