|
Do it yourself
| |||
| ||||
How to change the graphics of the Toyota Corolla Cross cockpit
Model: Toyota Corolla Cross
Xg10, MK 1
- Years 2020-2026
In this video we see how to change the graphics of the instrument panel of the Toyota Corolla Cross: the controls are located on the left side of the steering wheel, and by pressing the "ok" button and then pressing the up/down buttons, we get to the settings. Here we can activate and deactivate all the safety systems that the vehicle is equipped with. We search for "instrument settings", hold down and enter the submenu of the settings, where there are various options but we are interested in the type of instrumentation, where we can choose between classic instrumentation, only analog speedometer, or digital speedometer. By keeping the classic instrumentation, we can modify its appearance with four different modes. Within each of them, it is possible to choose whether to display the tachometer or the counter of the hybrid system that indicates if we are traveling in an ecological way, or if we are using the thermal engine, or if we are recharging the batteries.
Posted on 16 July 2025 by ScegliAuto
Video tutorial
Related tutorials
Toyota Corolla Cross
(2020-2026 /
Xg10, MK 1)
To disable the parking sensors on the Toyota Corolla Cross, turn on the ignition by inserting the key. Then, navigate through the menu that appears u…
Toyota Corolla Cross
(2020-2026 /
Xg10, MK 1)
You can use the cruise control on the Toyota Corolla Cross by first starting the engine and reaching the desired cruising speed: once this speed is r…
Toyota Corolla Cross
(2020-2026 /
Xg10, MK 1)
To replace the battery in the remote for the Toyota Corolla Cross, slide the key out from the bottom of the device to leverage it open. This will all…
Other guides you may be interested in
|
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.082
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
