Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light on the Toyota Yaris

Model: Toyota Yaris MK 4 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

Today we will see the information that will allow us to reset the tire pressure warning light of the Toyota Yaris; before performing the TPMS sensor reset, it is necessary for all four tires to be at the correct pressure. So, we get into the car and start up the dashboard; then we press and hold the TPMS reset button located at the bottom on the driver's side, until the warning light on the dashboard turns off, as shown in the video.

Finally, we turn off the dashboard and start the engine!


Posted on 25 August 2025 by ScegliAuto


Related tutorials

How to reset the tire pressure warning light on the Toyota Yaris
How to reset the tire pressure warning light on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Today's instructions will show us how to reset the tire pressure warning on the Toyota Yaris; before resetting the TPMS sensors, it is necessary for …
How to reset the tire pressure warning light on the Toyota Yaris.
How to reset the tire pressure warning light on the Toyota Yaris.
Toyota Yaris (2011-2019 / Xp130) These brief and simple steps will illustrate how to reset the tire pressure warning for the Toyota Yaris. Before performing the reset of the TPMS sen…
Resetting the tire pressure warning light on the Toyota Yaris.
Resetting the tire pressure warning light on the Toyota Yaris.
Toyota Yaris (2020-2026 / MK 4) Shortly we will see the instructions that will allow us to reset the tire pressure warning of the Toyota Yaris; before resetting the TPMS sensors, it…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos