|
Do it yourself
| |||
| ||||
How to check the tire pressure on a Toyota Corolla 2003/2008
Model: Toyota Corolla
MK 2
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
In this video, we will see how to check the tire pressure on a Toyota Corolla 2003/2008. We will find the sticker with the reference pressures on the driver's door pillar. In this video, the pressures are indicated in PSI (pounds per square inch): the equivalence is 1 PSI = 0.068 Bar (which is the measurement used in the EU). The pressure should be measured on cold tires with a tire pressure gauge, which can be digital or analog: we remove the valve cap, take the gauge, firmly press the nozzle onto the valve, and we will hear a slight hiss: we read the value and repeat for all four tires. If necessary, we adjust the pressure with a portable compressor as shown in the video, inserting the compressor nozzle into the cigarette lighter and starting the car. We connect the valve and start the compressor. We inflate in short intervals, not relying too much on the built-in gauge in the portable compressor (which is often not very accurate). Once the desired pressure is reached, we put the valve cap back on and repeat with the other tires.
Posted on 25 August 2025 by ScegliAuto
Related tutorials
Toyota Corolla
(2006-2013 /
MK 3)
Before you begin, sit in the driver's seat of your Toyota Corolla. Insert the key into the ignition and turn it to the first position to activate the…
Toyota Corolla
(2019-2026 /
MK 5, E210)
In this guide, you will discover how to check and then reset the tyre pressure light of the Toyota Corolla; before registering the TPMS sensors, it i…
Toyota Corolla
(2000-2007 /
MK 2)
The following steps will show us how to reset the tire pressure warning on the Toyota Corolla; before resetting the TPMS sensors, it is necessary tha…
Other guides you may be interested in
|
How to Open the Bonnet on the Mitsubishi L200?
In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |