Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light of the Toyota Matrix

Model: Toyota Toyota Various
Part: License plate light

Video tutorial

If the license plate light of your Toyota Matrix has suddenly stopped working, then you must replace it as soon as possible to avoid getting a fine. Below, you will find a description of all the steps you need to follow to complete the operation.

First of all, lift the rear hood of the vehicle and remove the protective cover located at the top. Once you have done this, disconnect the electrical connector from the lamp holder and unscrew it. Finally, replace the faulty bulb with a new one and reassemble everything.


Posted on 29 August 2025 by ScegliAuto


Related tutorials

How to replace the front headlight bulb of the Toyota Matrix
How to replace the front headlight bulb of the Toyota Matrix
Toyota Toyota Various In the following guide, we will help you complete the replacement of the front headlight bulb of your Toyota Matrix correctly and safely. First of al…
How to reset the service light on the Toyota Matrix?
How to reset the service light on the Toyota Matrix?
Toyota Toyota Various In this tutorial, we can see how to reset the service in the Toyota Matrix, an extremely simple and quick operation to be carried out only after comp…
What is the Fuse Diagram for the Toyota Matrix?
What is the Fuse Diagram for the Toyota Matrix?
Toyota Toyota Various In this video, you can see where the fuse boxes are located in the Toyota Matrix and their respective diagrams, to consult in case you need to check …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos