Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Toyota Camry?

Model: Toyota Camry Xv70 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tire pressure warning light

See other generations:
Video tutorial

To make the tire pressure warning light on the Toyota Camry disappear completely, you will first need to inflate the tires until they reach the recommended pressure value: this value will be indicated on the sticker that is attached to the driver's side door jamb.

After inflating the tires, you can navigate to the menu that appears on the instrument panel: you will then need to select the "TPWS" option and wait a few seconds for the sensors to read the new pressure values.

If these are correct, the warning light will turn off.


Posted on 23 September 2025 by ScegliAuto


Related tutorials

How to Reset the Tire Light on a Toyota Camry?
How to Reset the Tire Light on a Toyota Camry?
Toyota Camry (2006-2013 / Xv40) To reset the tire light on a Toyota Camry, start by turning on the engine without fully starting the car. Open the glove compartment and locate the d…
How do you reset the tire pressure light on the Toyota Camry?
How do you reset the tire pressure light on the Toyota Camry?
Toyota Camry (2018-2024 / Xv70) It will be possible to completely reset the tire pressure warning light of the Toyota Camry by inflating the tires to the optimal pressure value: thi…
How to Reset the TPMS Light on a Toyota Camry
Toyota Camry (2006-2013 / Xv40) If the TPMS light incorrectly detects a tire pressure issue on your Toyota Camry, you need to perform the following manual reset procedure. The entir…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos