Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads of the Toyota Hilux

Model: Toyota HiLux MK 7, An10, An20, An30 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Brake pads

See other generations:
Video tutorial

Below we will discover how to disassemble and replace the front brake pads of the Toyota Hilux. First, lift the vehicle and start by removing the front wheel; then proceed to unscrew the fastening screws of the brake caliper, in order to remove it from the disc, as shown in the video.

At this point, remove the old brake pads, applying pressure on the caliper piston to retract it; clean the caliper from any residual dirt, installing the new original brake pads; finally, reassemble the caliper on the disc, replacing the other brake pads in the same way.


Posted on 4 October 2025 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads of the Toyota Hilux?
How to Replace the Front Brake Pads of the Toyota Hilux?
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) To replace the front brake pads of the Toyota Hilux, lift the vehicle with a jack so that the corresponding wheel is off the ground. Once lifted, uns…
How to Replace the Headlight Bulbs in a Toyota Hilux?
How to Replace the Headlight Bulbs in a Toyota Hilux?
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) In this tutorial, you will learn how to replace the headlight bulbs in a Toyota Hilux, a very simple and quick operation. First, ensure that the key …
Where are the fuses located in the Toyota Hilux?
Where are the fuses located in the Toyota Hilux?
Toyota HiLux (1988-1997 / N80, N110, N90, N100) Any fuse in the Toyota Hilux is located inside one of the designated fuse boxes present in the vehicle: in this type of vehicle, you will find two bo…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos