Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs in a Toyota Hilux?

Model: Toyota HiLux An30, An20, MK 7, An10 - Years 2005-2015
Part: Headlight bulb

In this tutorial, you will learn how to replace the headlight bulbs in a Toyota Hilux, a very simple and quick operation. First, ensure that the key is not in the ignition for safety. Then, open the hood, locate the large rubber cap at the back of the headlight in question, and remove it. Next, unclip the indicated metal clip, extract the old bulb from the housing, and disconnect the power connector. At this point, connect the replacement bulb, insert it into the headlight, and reassemble everything.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Toyota Hilux
Replacing Front Headlight Bulb on Toyota Hilux
Toyota HiLux (2005-2015 / An30, An20, MK 7, An10) Replace the damaged front headlight bulbs on a Toyota Hilux. Open the hood by pulling the hood release lever and secure it. Remove the covers located…
Where are the fuses located in the Toyota Hilux?
Where are the fuses located in the Toyota Hilux?
Toyota HiLux (2015-2024 / An130, An120, MK 8) The fuses in the Toyota Hilux are divided between two fuse boxes located in the vehicle: the first is inside the cabin, in the dashboard area just be…
Where are the fuses located in the Toyota Hilux?
Where are the fuses located in the Toyota Hilux?
Toyota HiLux (1988-1997 / N100, N80, N110, N90) It will be possible to locate the fuses of the Toyota Hilux inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos