Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Toyota Hilux

Model: Toyota HiLux MK 8, An130, An120 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Headlight bulb

See other generations:
Video tutorial

Today we will see the main instructions that will allow us to disassemble and replace the headlight bulb of the Toyota Hilux. First of all, we open the hood of the vehicle and start by disconnecting the electrical connector of the bulb, removing the bulb holder from the front headlight; we then remove the low beam bulb, as shown in the video.

At this point, we install the new headlight bulb, of the correct type and with the same fitting; we reassemble and connect the bulb correctly, replacing the other bulb of the front headlight in the same way!


Posted on 10 September 2025 by ScegliAuto


Related tutorials

Replacing Front Headlight Bulb on Toyota Hilux
Replacing Front Headlight Bulb on Toyota Hilux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) Replace the damaged front headlight bulbs on a Toyota Hilux. Open the hood by pulling the hood release lever and secure it. Remove the covers located…
How to Replace the Headlight Bulbs in a Toyota Hilux?
How to Replace the Headlight Bulbs in a Toyota Hilux?
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) In this tutorial, you will learn how to replace the headlight bulbs in a Toyota Hilux, a very simple and quick operation. First, ensure that the key …
How to Replace the Taillight Bulb on a Toyota Hilux
How to Replace the Taillight Bulb on a Toyota Hilux
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) To replace the taillight bulb on a Toyota Hilux, lower the tailgate of the cargo area to access the side screws securing the taillight. Once these sc…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos