Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. HiLux
    4. : Removing the headlight bulb on Toyota Hilux

Toyota HiLux - Video tutorial

Model: Toyota HiLux MK 7, An10, An30, An20 - Years 2005-2015
Part: Headlight bulb
Operation: Removing the headlight bulb on Toyota Hilux

Replacing damaged headlight bulbs on a Toyota Hilux, let's see how they replace them. We open the bonnet by pulling the bonnet opening lever and put it in safety. We uncover the caps placed behind the lighthouse. We disconnect the power supply terminals. At this point we detach the lamp holders from the headlight and extract the same from the car body. We mount the new bulbs inside the lamp holder and then inside the headlight (always suitable type and size). We close the back of the lighthouse with the plastic caps. We test the correct functioning of the Hilux lights.


Posted on 2 December 2023 by ScegliAuto



How to replace the Toyota Hilux rear light bulb?
Toyota HiLux (2005-2015 / MK 7, An10, An30, An20) In order to replace the rear light bulb of the Toyota Hilux, the tailgate of the load compartment must be lowered, so as to be able to access the sid
How to remove the rear lights on a Toyota Hilux?
Toyota HiLux (1997-2005 / N170, N160, N140, N150) In this tutorial, we can see how to remove the rear lights on the Toyota Hilux, a very simple and fast operation. Before proceeding, make sure that t
How to replace the front headlights bulbs in the Toyota Hilux pick-up truck?
Toyota HiLux (2005-2015 / MK 7, An10, An30, An20) In this tutorial, we can see how to replace the front headlights bulbs in the Toyota Hilux pickup truck, an extremely simple and quick operation. Fir

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos