Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the car radio of the Toyota Verso

Model: Toyota Verso MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

See other generations:
Video tutorial

Today we will explain how to replace the car radio in a Toyota Verso vehicle. To carry out the radio replacement, we need to remove the side covers using a flathead screwdriver.

After removing the covers, we will use a star screwdriver to unscrew the four screws along the sides of the car radio to remove the unit. We carefully extract the radio, taking care not to damage the cables.

We disconnect the connector and the antenna cable to remove the radio from its housing. Now it will be possible to carry out maintenance work or install a new car radio.

The procedure for installing the new car radio is the same, just done in reverse.


Posted on 25 November 2025 by ScegliAuto


Related tutorials

Where to Find and How to Access the Fuse Box on a Toyota Verso?
Where to Find and How to Access the Fuse Box on a Toyota Verso?
Toyota Verso (1995-2002 / MK 1) The fuse box on your Toyota Verso is located behind the glove compartment of the front passenger side. Start by entering the cabin of your vehicle. N…
How to Remove the Air Filter from a Toyota Yaris Verso
Toyota Verso (1995-2002 / MK 1) Before you can begin, you must open the front bonnet of your Toyota Yaris Verso. Start by unclipping the two side clips that secure the air filter co…
How to Remove the Fuel Pump on Toyota Verso
How to Remove the Fuel Pump on Toyota Verso
Toyota Verso (2009-2018 / MK 4) Let's see how to remove the fuel pump on a Toyota Verso. First, disconnect the battery cables, then remove the rear seat from the car. You will find …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos