Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Steering Track Rod End on a Toyota Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Bushings

See other generations:
Video tutorial

Let's look at removing the steering track rod end on a Toyota Yaris. Position your car on a column lift and raise it to a comfortable height for working.

Unscrew the wheel nuts with a telescopic spanner or air drill and remove the wheel from the vehicle. Start unscrewing the track rod end bolts with a socket spanner: unscrew the bolts located under the wishbone and stabiliser bar, then pull the track rod end away from the vehicle body.

Fit the new track rod end, then screw it in with all the associated bolts. Finally, refit the wheel with the nuts.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

Toyota Yaris (2005-2011 / Xp90) The following steps will show how to disassemble and replace the starter motor on a Toyota Yaris. First, open the bonnet of the vehicle and disconnec…
Toyota Yaris (2005-2011 / Xp90) Today, learn how to remove and replace the window seal on the side window of a Toyota Yaris in simple steps; this operation can also be performed on …
Toyota Yaris (2005-2011 / Xp90) Start by inserting the tip of a flathead screwdriver into the slot on the side of your Toyota Yaris key and lever it open. Then, detach and remove th…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos