Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the V-belt of the Toyota RAV 4 2.0

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Timing belt

In a few simple steps, we will see the instructions that will allow us to disassemble and replace the trapezoidal belt of the Toyota RAV 4 2.0. First, we lift the vehicle and start loosening the tensioner with the appropriate tool, then disconnect and remove the trapezoidal belt from the various pulleys, as shown in the video. At this point, we install the new trapezoidal belt in the correct direction, first placing it on the crankshaft pulley; we check that the belt is correctly positioned by turning the engine by hand, following the video tutorial until the end!

Posted on 18 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the poly v trapezoidal belt of the Toyota RAV 4 2.0
How to replace the poly v trapezoidal belt of the Toyota RAV 4 2.0
Toyota Rav 4 (2000-2006 / Xa20, MK 2) The following steps will show us how to disassemble and replace the poly v multi-groove belt of the Toyota RAV 4 with a 2.0 engine. First, lift the v…
How to Replace the Serpentine Belt on a Toyota RAV 4?
How to Replace the Serpentine Belt on a Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) You can replace the serpentine belt on the Toyota RAV 4 by lifting the car with a jack or ramp to completely remove the right front wheel. Once the w…
How to Replace the Timing Belt and Water Pump on the Toyota RAV 4
How to Replace the Timing Belt and Water Pump on the Toyota RAV 4
Toyota Rav 4 (1994-2000 / MK 1, Xa10) Today, we will go through the instructions for removing and replacing the timing belt on the Toyota RAV 4. First, lift the vehicle and start by remov…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos