Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Renew Your Toyota Key with a Modern Remote?

Model: Toyota Toyota Various
Part: Key

In this video, we will see how to convert our old Toyota key into a modern two-button remote. We need to unscrew the small screw located under the key, then cut around the key, as the casing is almost certainly glued all around. Once the key is open, take the electronics from the old key and insert them into the casing of the new one, which is perfectly adaptable. You can obtain the new casing from mr-key.com/it with the code TOY043 for £9.99 (delivery charges not specified). The key does not seem to be replaceable, but it must be cut by a professional who can reproduce it; however, it is still a minimal expense.

Posted on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How can I change the remote control battery of my Toyota?
How can I change the remote control battery of my Toyota?
Toyota Toyota Various If you need to replace the remote control battery of your Toyota key, in this video you will see how. First we take our remote control and press the …
How to replace the battery of a Toyota key.
How to replace the battery of a Toyota key.
Toyota Toyota Various Today we will explain how to replace the key battery on a Toyota vehicle. To perform this operation, we need to insert a flat-head screwdriver into t…
How to replace the battery of the Toyota vehicles' key from 2000
Toyota Toyota Various Today we will explain how to replace the battery of the key for Toyota vehicles produced in the 2000s. To perform this operation, we need to insert a…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos