Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the 12V Battery of the Toyota Yaris Hybrid

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

Today, we will look at the instructions that will allow you to replace the 12V battery of the Toyota Yaris Hybrid. First, open the right rear door of the vehicle and start removing the plastic cover found under the rear seat; inside, you will find the battery, as shown in the video.

At this point, disconnect both battery terminals (positive and negative), remove it from its compartment, and replace it with the new one. Install the battery in the correct orientation, ensuring it is the right type and has the same amperage, connect it, and start the engine!


Posted on 17 February 2026 by ScegliAuto


Related tutorials

How to Replace the 12V Battery in a Toyota Yaris Hybrid?
How to Replace the 12V Battery in a Toyota Yaris Hybrid?
Toyota Yaris (2020-2026 / MK 4) In this tutorial, you will see how to replace the 12V battery in a Toyota Yaris Hybrid. The battery is located under the rear seat, so first, remove …
How to Replace the Battery in a Toyota Yaris Hybrid?
How to Replace the Battery in a Toyota Yaris Hybrid?
Toyota Yaris (2020-2026 / MK 4) You can replace the battery in a Toyota Yaris Hybrid by loosening the screws that secure the rear seat to its housing: the screws will be located at …
How to Replace the 12V Battery in a Toyota Yaris Hybrid
How to Replace the 12V Battery in a Toyota Yaris Hybrid
Toyota Yaris (2020-2026 / MK 4) To replace the 12V battery in the Toyota Yaris Hybrid, move the seat forward to access the area underneath. Locate the cover panel on the floor and r…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2011-2019 - How much does it cost to replace the batteries in the Toyota Yaris Hybrid in the UK? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos