Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt and Water Pump on a Toyota 4Runner 3.4L

Model: Toyota 4runner N180 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Timing belt

See other generations:
Video tutorial

In this guide, we will go over the main instructions for replacing the timing belt and water pump on a Toyota 4Runner 3.4L. First, open the vehicle's hood and start removing the engine mount on the timing belt side; then lift the vehicle and disconnect the serpentine belt, subsequently removing the crankshaft pulley, as shown in the video.

At this point, take the necessary references for replacing the belt, installing the new original one; also replace the water pump kit, following the video tutorial until the end!


Posted on 24 February 2026 by ScegliAuto


Related tutorials

How to Replace the Alternator on a Toyota 4Runner?
How to Replace the Alternator on a Toyota 4Runner?
Toyota 4runner (1996-2002 / N180) To replace the alternator on a Toyota 4Runner, open the hood to access the components inside the engine compartment. On the right side, you will find…
Where Are the Fuel Pump Relays in the Toyota 4Runner?
Where Are the Fuel Pump Relays in the Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) If the fuel pump in your Toyota 4Runner has suddenly stopped working and the related fuse is intact, you can check the status of the respective relay…
How to Replace the Fuel Filter on the Toyota 4Runner N180
How to Replace the Fuel Filter on the Toyota 4Runner N180
Toyota 4runner (1996-2002 / N180) This guide shows how to replace the fuel filter on the Toyota 4Runner N180. The first step is to disconnect the EFI fuse, which controls the fuel pum…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos