Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil in a Toyota Highlander?

Model: Toyota Highlander Xu50 - Years 2014-2019
Part: Engine oil

To change the oil in your Toyota Highlander, the procedure is very simple. First, place the car on ramps to access the oil sump more easily. Using a deep container, unscrew the plug in the oil sump to allow the oil to drain out. As always, to help the flow, open the oil cap near the engine. Once the oil sump is completely drained, proceed to change the filter located under the car near the sump. After replacing the filter, and optionally the plug and gasket of the sump, add new oil following the specifications in the manual to avoid mistakes.

Posted on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil Sump on a Toyota Highlander
How to Replace the Engine Oil Sump on a Toyota Highlander
Toyota Highlander (2001-2007 / Xu20) In this video tutorial, learn how to remove and replace the engine oil sump on a Toyota Highlander. First, lift the vehicle and begin draining the en…
How to reset the service light in the Toyota Highlander?
How to reset the service light in the Toyota Highlander?
Toyota Highlander (2014-2019 / Xu50) In this tutorial, you will see how to reset the service light in the Toyota Highlander. This simple and quick operation should only be performed afte…
How to Replace the Spark Plug on the Toyota Highlander
How to Replace the Spark Plug on the Toyota Highlander
Toyota Highlander (2001-2007 / Xu20) Timely replacement of a faulty or completely broken spark plug is essential to ensure excellent performance and longevity of the engine. In this mini…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos