Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Toyota Yaris Cross

Model: Toyota Yaris Cross MK 1 - Years 2020-2026
Part: Cabin air filter

Today, we will explain how to independently replace the cabin air filter on the Toyota Yaris Cross. The air filter on new Toyotas is installed inside the cabin under the left rear passenger seat. To replace the filter, open the rear door and remove the protective grille using a flathead screwdriver. After removing the protective grille, you can replace the filter. Reinstall the grille, but it is important to clean the filter housing before inserting the new one. The filter can be purchased online or at auto parts stores for a cost of £12.00 to a maximum of £20.00.

Posted on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the 2024 Toyota Yaris Cross
How to replace the cabin air filter of the 2024 Toyota Yaris Cross
Toyota Yaris Cross (2020-2026 / MK 1) Thanks to the following guide, you will be able to independently replace the cabin air filter in your Toyota Yaris Cross (year 2024). First of all, e…
How do you replace the cabin filter in the Toyota Yaris Cross?
How do you replace the cabin filter in the Toyota Yaris Cross?
Toyota Yaris Cross (2020-2026 / MK 1) It will be possible to replace the cabin filter of the Toyota Yaris Cross by opening the glove compartment located on the passenger side. Here, you c…
Where is the battery located in the Toyota Yaris Cross Hybrid?
Where is the battery located in the Toyota Yaris Cross Hybrid?
Toyota Yaris Cross (2020-2026 / MK 1) The battery of the Toyota Yaris Cross Hybrid is installed inside the cabin; specifically, the battery is placed under the rear passenger seat. In cas…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos