Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Toyota Land Cruiser

Model: Toyota Land Cruiser MK 11, J200 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the front headlamp bulb is a simple and quick task that can be done independently on Toyota Land Cruiser vehicles. This guide explains how to replace the bulb on vehicles produced from 2007 to 2021. The procedure is straightforward and does not require any special tools, just the purchase of an H7 bulb.

To proceed with the replacement, open the front bonnet and remove the headlamp cover. Press on the clip to disconnect the bulb from its electrical connector.

Remove the bulbs by pressing on the metal base and insert the new one. Connect the connector to the bulb, securing it with the clip. Close the headlamp cover and the front bonnet after the replacement.


Posted on 14 July 2026 by ScegliAuto


Related tutorials

How to Replace the Fog Light Bulb on the Toyota Land Cruiser J120
How to Replace the Fog Light Bulb on the Toyota Land Cruiser J120
Toyota Land Cruiser (2002-2009 / MK 10, J120) In today's tutorial video, you will learn how to remove and replace the front fog light, along with its bulb, on the Toyota Land Cruiser J120. First,…
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Toyota Land Cruiser (1990-1997 / MK 7, J80) To access the cabin fuse box in your Toyota Land Cruiser J80, follow the steps outlined below. Before starting, ensure the vehicle is parked on a fla…
Where is the fuse box located in the Toyota Land Cruiser J120?
Where is the fuse box located in the Toyota Land Cruiser J120?
Toyota Land Cruiser (2002-2009 / MK 10, J120) To locate the box containing all the fuses of your Toyota Land Cruiser j120, you must follow the steps described in our new guide addressed to you. F…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos