Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Rear Tailgate Beep on a Toyota Land Cruiser - Prado

Model: Toyota Land Cruiser - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

In this guide, you will find instructions to disable the beep when opening the rear tailgate of the Toyota Land Cruiser and Prado. First, get into the vehicle and turn on the ignition; then navigate to the vehicle settings using the controls on the steering wheel, holding down the "ok" button.

At this point, go to the PBD system option and then to the volume, lowering this value completely, as shown in the video. Check that the beep has been completely disabled!


Posted on 8 November 2026 by ScegliAuto


Related tutorials

Why has the Toyota Land Cruiser Prado radio stopped working?
Why has the Toyota Land Cruiser Prado radio stopped working?
Toyota Land Cruiser (2002-2009 / MK 10, J120) .. If the radio in your Toyota Land Cruiser Prado has suddenly stopped working, it is very likely that one of the related fuses has failed, the.. …
How to Replace the Pollen Filter in a Toyota Land Cruiser Prado 3?
How to Replace the Pollen Filter in a Toyota Land Cruiser Prado 3?
Toyota Land Cruiser (2002-2009 / MK 10, J120) .. the pollen filter in a Toyota Land Cruiser Prado 3. First, purchase a new pollen filter. Next, get inside the vehicle, turn off the engine, and.. …
How to Disable Lane Departure Alert in Toyota Land Cruiser?
How to Disable Lane Departure Alert in Toyota Land Cruiser?
Toyota Land Cruiser (2021-2026 / J300) In this tutorial, you will see how to disable the Lane Departure Alert system in the Toyota Land Cruiser, a very simple and quick operation, for exam…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos