Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Rear Bumper on a RAV4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Rear bumper

See other generations:
Video tutorial

Is the rear bumper of your RAV4 broken? Here’s how to remove it from the back of the car. Open the boot lid, unscrew the securing bolts located at the front of the bumper (behind the boot lid). Remove the screws at the bottom of the bumper, then take out the screws located at the sides of the wheel arch liners.

Once the bumper is free from any screws, grab it with both hands and pull it away from the bodywork (disconnect any wiring harnesses).

Fit the new bumper onto the rear bodywork (screw in the securing screws).


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlamp of a Toyota RAV4?
How to Remove the Front Headlamp of a Toyota RAV4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To remove the front headlamp of a Toyota RAV4, you must start by removing the front bumper. This usually requires unscrewing the fixing screws locate…
Replacing External Mirror Bulb on Toyota Rav4
Replacing External Mirror Bulb on Toyota Rav4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this video tutorial, you will learn how to remove and replace the bulb of the external mirror on a Toyota Rav4. First, remove the outer cover usin…
How to Replace the Interior Rear View Mirror on a Toyota RAV4?
How to Replace the Interior Rear View Mirror on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Today, we will go through the instructions for removing and replacing the exterior rear view mirror on a Toyota RAV4. First, open the front door and …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos