Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Coolant on a Toyota Yaris 1.0

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Antifreeze coolant

To replace the coolant, you must first drain all the coolant from the system; to do this, unscrew the drain screw located at the bottom of the radiator (taking care to collect the fluid in a container). Disconnect the hoses connected to the engine to drain the fluid present in the hoses and reposition them. Once done, you can add the new coolant as specified in the video (follow the recommended quantities in the owner's manual). Ensure that you have correctly closed the caps and fittings, and you are finished.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide on How to Replace the Coolant of the Toyota Yaris 2
Guide on How to Replace the Coolant of the Toyota Yaris 2
Toyota Yaris (2005-2011 / Xp90) This brief and simple guide shows how to replace the coolant or antifreeze of the second series Toyota Yaris. First, lift the vehicle and start drain…
Replacing the Radiator Fluid on Toyota Yaris Hybrid
Replacing the Radiator Fluid on Toyota Yaris Hybrid
Toyota Yaris (2011-2019 / Xp130) In this video, we will go through the steps to replace the radiator fluid or antifreeze on a Toyota Yaris Hybrid, third series. First, lift the vehic…
How to Top Up the Coolant on the Toyota Yaris?
How to Top Up the Coolant on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) If you intend to check and monitor the fluid levels in your vehicle, particularly the coolant, follow the instructions provided here and refer to the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos