Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Coolant on a Toyota Yaris

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Checks and maintenance

Want to replace the coolant in your Toyota Yaris? Here’s how to do it. Lift the front bonnet and secure it with the metal prop. Next, locate the coolant reservoir cap and remove it. Raise the car on a jack and disconnect the hose that leads to the radiator. Once all the coolant has drained out, reconnect the hose. Using a funnel, refill the coolant and close the reservoir cap. Close the engine bonnet after maintenance. Start the vehicle and check the operation.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide on How to Replace the Coolant of the Toyota Yaris 2
Guide on How to Replace the Coolant of the Toyota Yaris 2
Toyota Yaris (2005-2011 / Xp90) This brief and simple guide shows how to replace the coolant or antifreeze of the second series Toyota Yaris. First, lift the vehicle and start drain…
How to Top Up the Coolant on the Toyota Yaris?
How to Top Up the Coolant on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) If you intend to check and monitor the fluid levels in your vehicle, particularly the coolant, follow the instructions provided here and refer to the…
How to top up the coolant in a Toyota Yaris
How to top up the coolant in a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this very short video tutorial, we will see how to top up the radiator coolant in a Toyota Yaris, second generation model produced from 2005 to 20…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer
    • Yaris 2005-2011 - Where is the 2010 Toyota Yaris jack located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos