Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Dashboard and Car Radio

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Car stereo

Using a plastic tool to avoid damaging the bodywork, lever at the sides of the climate control panel to release the plastic clips and remove it. Still using a plastic tool, lever at the sides of the console panel and then remove it to access the retaining screws of the radio. Unscrew the screws of the radio panel to completely pull the car radio out of its housing. Carefully remove the car radio by lifting it to allow disconnection of the connectors at the back. Install the new car radio by reversing the procedures.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Car Radio Removal Instructions
Car Radio Removal Instructions
Toyota Yaris (1999-2005 / Xp10) Before proceeding with the removal of the car radio, ensure you have the code for restarting it. First, remove the climate control knobs by simply pu…
Removing the Radio Block from a Toyota Yaris
Removing the Radio Block from a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Want to remove the radio from the Yaris? Let's look at disassembling the components of the Toyota. Remove the plastic trim on the sides of the radio …
Replacing the Radio in a Toyota Yaris
Replacing the Radio in a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Let's see how to replace the radio in the Toyota Yaris with all the covering pieces of the central dashboard. Remove the radio trim frame with a plas…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2011-2019 - Why does the Toyota Yaris car radio not work? Read answer
    • Yaris 2005-2011 - How much does an AUX cable cost for the 2006 Toyota Yaris? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos