Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Anti-Roll Bar Installation

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Anti-roll bar

See other generations:
This video is currently unavailable

Lift the rear of the vehicle on suitable axle stands and unscrew the fixing pins of the rear shock absorbers, placing a jack under the shock absorber support before removing the pin. Then position the torsion bar, which should pass in front of the suspension springs; repeat the same operation on the other side and tighten the fixing pins carefully.

This will significantly improve the vehicle's torsional stiffness, benefiting stability and road holding, as well as the symmetrical wear of the tyres.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Replacing the Anti-Roll Bar on Your Car
Replacing the Anti-Roll Bar on Your Car
Toyota Yaris (2005-2011 / Xp90) This guide shows, in its various steps, how to replace the anti-roll bars on your car. To perform this task, you will need to lift the car and secure…
Installation of Anti-Roll Bar
Installation of Anti-Roll Bar
Toyota Yaris (2005-2011 / Xp90) Installing anti-roll bars increases the torsional stiffness of the vehicle's chassis, providing better road holding and smoother, more precise contro…
How to Remove the Gear Knob of a Toyota Yaris
How to Remove the Gear Knob of a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) If you intend to replace the gear knob of a Toyota Yaris, first remove the currently fitted one. It is strongly advised to perform these operations w…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos