Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Anti-Roll Bar

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Accessory kit

Installing anti-roll bars increases the torsional stiffness of the vehicle's chassis, providing better road holding and smoother, more precise control when entering and exiting corners. Typically, it is installed at the front shock absorber mounts, but in this case, three have been installed along the chassis (one at the front, one in the centre, and one at the rear). Additionally, a further connecting bar has been installed between the rear shock absorbers. The installation is straightforward and requires no modifications.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Rear Anti-Roll Bar Installation
Toyota Yaris (2005-2011 / Xp90) Lift the rear of the vehicle on suitable axle stands and unscrew the fixing pins of the rear shock absorbers, placing a jack under the shock absorber…
Replacing the Anti-Roll Bar on Your Car
Replacing the Anti-Roll Bar on Your Car
Toyota Yaris (2005-2011 / Xp90) .. in its various steps, how to replace the anti-roll bars on your car. To perform this task, you will need to lift the car and secure the wheels. Almost.. …
Front Shock Absorber Replacement
Front Shock Absorber Replacement
Toyota Yaris (2005-2011 / Xp90) .. that connects the shock absorber to the anti-roll bar and remove the support bracket for the brake fluid pipe. At this point, unscrew the two bolts.. …

    Frequently Asked Questions

    • Yaris 2011-2019 - Where is the 2008 Toyota Yaris jack located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos