Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Bumper on Toyota Auris

Model: Toyota Auris E150 - Years 2007-2012
Part: Front bumper

In this video, you will see the main steps to remove the front bumper on a Toyota Auris. First, open the bonnet of your car and start by removing the upper clips of the front bumper; then, remove the grille and take out the other clips found on the lower part. At this point, move to the wheel arches and remove the additional clips to detach the bumper from the sides of the vehicle; now remove the screws located under the bumper and the electrical connector for the fog lights, so you can gently detach the bumper!

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight on the Toyota Auris?
How to Remove the Front Headlight on the Toyota Auris?
Toyota Auris (2007-2012 / E150) To remove the front headlight on the Toyota Auris, first remove the front bumper: the screws located at the top can be loosened by opening the bonnet…
How to Remove the Rear Bumper on a Toyota Auris?
How to Remove the Rear Bumper on a Toyota Auris?
Toyota Auris (2007-2012 / E150) In this tutorial, you will see how to remove the rear bumper on a Toyota Auris, a very simple and quick operation. First, open the boot, then locate …
How to disassemble the rear light and bumper of the Toyota Auris
How to disassemble the rear light and bumper of the Toyota Auris
Toyota Auris (2007-2012 / E150) Today we will discover the instructions that will allow us to disassemble and replace the rear taillight and bumper of the Toyota Auris. First, we op…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos