Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Light Cluster

Model: Toyota Celica T230 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Tail light

See other generations:
Video tutorial

To replace the entire rear light cluster, access the fastening screws located on the side of the boot, after removing the cover by prying with a plastic tool in the designated slot and removing part of the cover panel. Use a ratchet spanner to unscrew the light securing screws and remove the light by disconnecting the connectors.

Once the light is removed, carefully replace it with a new one that has the same specifications. Reposition the light cluster in the housing, connecting the respective connector.

Tighten the fastening screw carefully and close the plastic cover.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Replacement of Front Headlight Bulbs
Toyota Celica (1999-2006 / T230) To replace the bulbs, you need to almost completely dismantle the front light assembly. Remove all the retaining screws from the front grille and gen…
How to disassemble the front headlights of the Toyota Celica
How to disassemble the front headlights of the Toyota Celica
Toyota Celica (1999-2006 / T230) In this guide we will see the instructions that will allow us to dismantle the front headlights of the Toyota Celica. First, open the hood of the car…
How to Remove the Rear Seats of the Toyota Celica
How to Remove the Rear Seats of the Toyota Celica
Toyota Celica (1999-2006 / T230) In today's tutorial, we will guide you on how to remove the rear seats of the Toyota Celica, following these simple and quick steps. First, open the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos