Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlight Bulbs

Model: Toyota Celica T230 - Years 1999-2006
Part: Headlight

To replace the bulbs, you need to almost completely dismantle the front light assembly. Remove all the retaining screws from the front grille and gently pull it away as far as possible. Dismantle the glass of the headlight assembly by removing the side screws and gently pulling it out of its housing. Remove the lamp retaining spring and gently twist it to take it out. Install the new bulb without touching the glass bulb with your hands. Reassemble the two bulb holders in their respective positions and reposition the headlight assembly in its housing, connecting the relevant connector.

Updated on 6 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Injectors on a Toyota Celica?
How to Replace the Injectors on a Toyota Celica?
Toyota Celica (1999-2006 / T230) To replace the injectors on a Toyota Celica, open the bonnet to access the top of the engine block. Locate the connectors attached to the injectors a…
Replacement of Remote Key Battery
Replacement of Remote Key Battery
Toyota Celica (1999-2006 / T230) Many Toyota models are equipped with the so-called Keyless system: inside the remote, there is a transponder that is recognised simply by approaching…
Replacement of Rear Light Cluster
Replacement of Rear Light Cluster
Toyota Celica (1999-2006 / T230) To replace the entire rear light cluster, access the fastening screws located on the side of the boot, after removing the cover by prying with a plas…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos