Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel of a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Steering wheel

See other generations:
Video tutorial

Before you can start, sit in the driver's seat of your Toyota Yaris. First, rotate the steering wheel ninety degrees to the right.

This will expose the rear clips that secure the airbag. Proceed to unclip these clips, then remove the airbag module from the steering wheel, and finally disconnect the associated wiring and connectors.

Once you have removed the airbag, you will have access to the central nut that secures the steering wheel to the steering column. At this point, unscrew and remove this nut, then unclip and remove the steering wheel, successfully completing the disassembly.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel of the Toyota Yaris
How to Remove the Steering Wheel of the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) In this brief and simple guide, discover how to remove and replace the standard steering wheel of the Toyota Yaris, following the instructions below.…
How to remove the steering wheel airbag of the Toyota Yaris
How to remove the steering wheel airbag of the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) These short and simple instructions will guide us through the process of disassembling and replacing the steering wheel airbag of the Toyota Yaris. F…
How to Remove the Airbag from the Toyota Yaris Steering Wheel
How to Remove the Airbag from the Toyota Yaris Steering Wheel
Toyota Yaris (2005-2011 / Xp90) To remove the airbag from the steering wheel of the Toyota Yaris, follow these steps: locate the two screws on either side of the steering wheel at t…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos