Do it yourself
Frequently asked questions about cars and motorcycles

Tire pressure reset on Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part:

Resetting the tire pressure warning light on Toyota Yaris (but also Auris and Prius) is extremely simple, but there is the hitch. To begin, turn on the instrument panel with the appropriate key (not the engine, it is not necessary) and, once it appears, simply press a button to reset the warning light. But which? In fact, the aforementioned button is not found in the "usual places", neither on the steering wheel nor on the on-board computer. To locate it, you have to go down: this button is located in the part under the steering wheel, the lowest part of the dashboard, therefore just above the pedals. You will notice the button that says "set": keep it pressed until the reset is done.


Posted on 27 January 2024 by ScegliAuto



How to reset the tire pressure warning light on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Below we will see the procedure for resetting the tire pressure warning light of the Toyota Yaris; before performing the TPMS reset, it is necessary
How to reset the tire pressure light on the Toyota Yaris
Toyota Yaris (2020-2024 / MK 4) These short and simple instructions will show us the process of resetting the tire pressure warning light (TPMS) of the Toyota Yaris; before performi
How do you reset the tire pressure warning light on the Toyota Yaris?
Toyota Yaris (2020-2024 / MK 4) In order to restore the tire pressure warning light on the Toyota Yaris, you must first inflate the car's tires, bringing them to the recommended pre

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos