Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Car stereo

See other generations:
Video tutorial

Before you begin, sit in the driver's seat of your Toyota Yaris. Start by prising off and removing the side covers of the central dashboard.

Then, remove the air vents along with the radio's frame, and disconnect the electrical connector for the hazard light button. This will reveal the screws securing the radio to the central dashboard, which you need to unscrew and remove.

Once you have removed the securing screws, you can pull the radio from its housing and disconnect the electrical plugs. After completing this last step, you will have successfully removed the radio.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

How to Replace the Car Radio in a Toyota Yaris
How to Replace the Car Radio in a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Replacing the car radio in a Toyota Yaris is a fairly simple task to do yourself. To perform this operation, remove the hard plastic cover around the…
Replacing the Radio in a Toyota Yaris
Replacing the Radio in a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Let's see how to replace the radio in the Toyota Yaris with all the covering pieces of the central dashboard. Remove the radio trim frame with a plas…
How to replace the radio in a Toyota Yaris?
How to replace the radio in a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To replace the radio in a Toyota Yaris, use a tool like a screwdriver to lever off the trim surrounding the radio and along the dashboard. Once this …

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - How much does an AUX cable cost for the 2006 Toyota Yaris? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos