Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement on Toyota Corolla mk3

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Battery

See other generations:
Video tutorial

Like many car models, replacing the battery on a Toyota Corolla mk3 is quite simple. With the engine off and the handbrake engaged, lift the front bonnet of the car. Use a 10 mm socket to unscrew and disconnect the two battery terminals, remembering to always disconnect the negative terminal first and then the positive.

The same socket is suitable for unscrewing the two bolts that secure the upper battery bracket: unscrew them and remove the bracket. Pull the battery out of its housing and reverse the process for installation.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Battery Replacement for the Toyota Corolla
Battery Replacement for the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) In today's tutorial video, we will see how to remove and replace the battery in the Toyota Corolla, following the instructions below. First, open the…
How to Replace the Battery in a Toyota Corolla?
How to Replace the Battery in a Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) Replacing the battery in a Toyota Corolla is a straightforward and quick task you can do yourself. Start the replacement by opening the bonnet and un…
How to replace the battery of the Toyota Corolla key
How to replace the battery of the Toyota Corolla key
Toyota Corolla (2000-2007 / MK 2) The steps to replace the battery of the Toyota Corolla remote control are simple and quick to perform. Before proceeding, let's get a CR 2032 model b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos