Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Replacement on a Toyota Hilux

Model: Toyota Toyota Various
Part: Fuse box

Do you want to replace the fuses on a Toyota Hilux? Enter the cabin and unlock the front bonnet to access the fuse box. Open the door, and using a plastic lever, remove the cover above the fuse box. Use needle-nose pliers to pull out the damaged fuses from the compartment. Once this is done, insert the new fuses into the appropriate slots in the compartment, and close the fuse inspection box with the plastic cover. Test the proper functioning of the vehicle by turning on the instrument panel with the appropriate key. Close the engine bay after the replacement.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery on the Toyota Hilux
How to Replace the Key Fob Battery on the Toyota Hilux
Toyota Toyota Various This guide shows how to replace the battery of the key fob on the Toyota Hilux. To perform this operation, first slide out the physical key from the …
Where are the Fuse Boxes Located in the Toyota Avanza?
Where are the Fuse Boxes Located in the Toyota Avanza?
Toyota Toyota Various For the Toyota Avanza, this video shows where the fuse boxes are located. This Toyota model was developed alongside Daihatsu and is primarily aimed a…
Position and diagram of the fuse box of the Toyota Harrier
Position and diagram of the fuse box of the Toyota Harrier
Toyota Toyota Various In this article you can find the video tutorial illustrating the fuse diagram of the Toyota Harrier, as well as the location of the fuses. At the beg…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos