Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Toyota 4runner N210 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter for this vehicle is located inside the glove compartment. Once the compartment is open, unscrew the guides and lower the compartment completely.

Now, extract an additional drawer where the filter is located by unlocking the clips. After removing it, take out the old filter and install the new cabin air filter within the limits set by the drawer.

Reinsert the drawer into its designated space, and screw the screws that connect the guides to the glove compartment. Once this last operation is completed, the job is finished.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Toyota 4Runner?
How to Replace the Cabin Air Filter in a Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) .. Replacing the cabin air filter in a Toyota 4Runner is a very simple task. Let's see how to proceed in.. …
Replacing Cabin Air Filter on Toyota 4Runner [USA]
Replacing Cabin Air Filter on Toyota 4Runner [USA]
Toyota 4runner (2010-2024 / N280) Identify the type of cabin air filter suitable for the vehicle (see owner's manual). Open the passenger side door, sit in the passenger seat, and ope…
How to replace the cabin air filter of the 2015 Toyota 4Runner
How to replace the cabin air filter of the 2015 Toyota 4Runner
Toyota 4runner (2010-2024 / N280) In this new guide of ours, we will explain to you the various steps that you need to follow if you intend to replace the cabin air filter of your 201…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos