Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Toyota RAV4?

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

After a few years of use, the key battery will eventually run out. Replacing it in the Toyota RAV4 remote is very simple; let’s see how to proceed in the attached video tutorial. For this, you will need a replacement CR2032 battery and a small flathead screwdriver.

Start by extracting the emergency metal key by pressing the designated button. Insert the screwdriver tip or the key itself into the newly opened slot, lever it, and split the remote in two. At this point, remove the internal board housing the battery, replace it, and reassemble everything.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the 2020 Toyota RAV4
How to Replace the Key Battery of the 2020 Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Replacing the battery located inside the key of your 2020 Toyota RAV4 is a very simple task, and you just need to follow the steps described below. F…
How to replace the battery of a Toyota Rav 4 key?
How to replace the battery of a Toyota Rav 4 key?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To replace the battery of a Toyota RAV4 key, start by identifying the type of key you have: most models come with a key with a built-in remote contro…
How to replace the battery of a Toyota RAV4 key
How to replace the battery of a Toyota RAV4 key
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In today's video, we will see how to replace the battery (CR2016) of a Toyota RAV4 key, a specific model produced from 2013 to 2018. So let's start t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos