Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Maintenance Light on a Toyota RAV 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

In today's tutorial, you will learn how to reset the oil maintenance light on a Toyota RAV 4. First, get in the car and turn on the ignition, then press the button on the dashboard. Turn off the ignition and press the dashboard button again, holding it down.

While doing this, turn the ignition back on with the key and wait until the reset is complete. Turn off and on again as a final check.

However, remember that the maintenance light reset should not be done unless the service has actually been performed to avoid damaging the engine.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Toyota Rav 4 MK5
How to Reset the Service Light on the Toyota Rav 4 MK5
Toyota Rav 4 (2019-2026 / MK 5, Xa50) This guide shows you the steps to reset the service light for the routine maintenance oil change on the fifth series Toyota Rav 4, following the inst…
How to Reset the Service Light on Toyota RAV 4?
How to Reset the Service Light on Toyota RAV 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) You can completely clear the Service light on the Toyota RAV 4 from the instrument cluster by activating the instrument panel and navigating through …
How to reset the Service light on a Toyota RAV 4?
How to reset the Service light on a Toyota RAV 4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To reset the Service light on a Toyota RAV 4, turn on the ignition by turning the key. Once the ignition is on, repeatedly press the button on the le…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos