Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Headlight of a Toyota Rav4

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Headlight

To replace the headlight on a Toyota Rav4, start by removing the top plastic cover of the headlights by taking off the plastic clips. Once the plastic cover is removed, take off the other clips and cross-head screws, using some lubricant if necessary. At the back of the bumper, remove one clip, take off the splash guard, and find one 10mm bolt. Go to the bottom of the bumper, find the clips and 10mm screws to remove, then pull the bumper off. Once the bumper is removed, you can take out the three 10mm bolts holding the headlight, lift the tabs securing the headlight, and remove it. With the headlight moved, disconnect the bulb connectors, clean them, and remove the bulb holders if the new headlight does not come with them. Take the new headlight, fit the bulb holders/bulbs if necessary, and proceed with reassembly, which is the same procedure as disassembly but in reverse (from reassembling the headlight, reattach the bumper and the top plastic cover). Finally, test the new headlight, and the operation is complete.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Rav 4 (2000-2006 / Xa20, MK 2) To correctly replace the headlight bulb of your second generation Toyota RAV4, you need to follow the steps described in this new mini guide. First o…
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Below we will see the information that will allow us to disassemble and replace the headlight bulb of the Toyota RAV4. First, we open the hood of the…
Toyota Rav 4 (2006-2013 / MK 3, Xa30) To disassemble the front headlight of a Toyota RAV4, you need to start by removing the front bumper. This usually involves unscrewing the fastening s…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos