Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check Oil Level and Quality

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Engine oil

See other generations:
Video tutorial

First, open the bonnet and remove the metal dipstick that measures the oil. Remember to park the car on level ground, with the engine off and cold. Clean the dipstick and reinsert it to check the oil level; if the level is between the two lines, it is correct, but if it is below, you need to add oil immediately.

If you do not have the correct engine oil, you can find it on the top of the dipstick or go to a garage where they will change the engine oil for you.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to Check the Oil Level in a Toyota RAV4?
How to Check the Oil Level in a Toyota RAV4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this video, you can see how to check the engine oil level in a Toyota RAV4. First, ensure the car is parked on a flat surface and the engine is co…
Replacing the Oil Filter and Engine Oil of a Toyota RAV 4 3 (XA30)
Replacing the Oil Filter and Engine Oil of a Toyota RAV 4 3 (XA30)
Toyota Rav 4 (2006-2013 / Xa30, MK 3) The video shows how to replace both the oil filter and engine oil of a Toyota RAV 4 3 (XA30). Open the bonnet and secure it with the prop rod. Unscre…
How to Change the Engine Oil on a Toyota Rav4
How to Change the Engine Oil on a Toyota Rav4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) How do we change the engine oil on our Toyota Rav4? It’s a simple operation if you follow the right guidelines. This video shows how to proceed. Lift…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos