Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Oil Level in a Toyota RAV4?

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine oil

See other generations:
Video tutorial

In this video, you can see how to check the engine oil level in a Toyota RAV4. First, ensure the car is parked on a flat surface and the engine is cold. Then, open the bonnet and locate the yellow ring on your left.

Grasp the ring and pull it upwards to fully extract the dipstick, which you will clean with absorbent paper. Reinsert the dipstick fully, pull it out again, and check the level.

If it is not between the two holes or is too close to the lower hole, open the large black cap and add oil until the ideal level is reached, which is just below the upper hole.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter of a Toyota RAV4
How to Replace the Engine Oil and Oil Filter of a Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) These brief steps will show you the procedure for replacing the engine oil and oil filter while performing the routine maintenance service on a Toyot…
Changing the Gearbox Oil on a Toyota RAV4 MK3
Changing the Gearbox Oil on a Toyota RAV4 MK3
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this video, see how to change the gearbox oil on a Toyota RAV4 MK3: first, you will need some quality transmission fluid, which you can easily obt…
How to Change the Engine Oil on a Toyota Rav4
How to Change the Engine Oil on a Toyota Rav4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) How do we change the engine oil on our Toyota Rav4? It’s a simple operation if you follow the right guidelines. This video shows how to proceed. Lift…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos