Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Toyota Corolla

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

If you want to know how to replace the button cell battery inside the key for the Toyota Corolla, simply read the following guide carefully and follow the various instructions provided. First, press the small button located at the top of the cover and fully extract the physical key from inside the cover.

Next, insert a small flat screwdriver into the gap created and gently push upwards. At this point, you will have access to the used battery.

Replace it with a new one and finally reassemble the cover, ensuring you insert the physical key back in.


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in the Toyota Corolla Matrix
How to Replace the Key Battery in the Toyota Corolla Matrix
Toyota Corolla (2000-2007 / MK 2) If you own a Toyota Corolla Matrix (2000-2007) and want to replace the button battery inside the key, follow the instructions in this guide. First, g…
How to Replace the Key Battery on a Toyota Corolla
How to Replace the Key Battery on a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Replacing the battery in your Toyota Corolla key takes just a few seconds and can be done independently. Follow the instructions provided here. First…
How to Replace the Key Battery of the Toyota Corolla Verso
How to Replace the Key Battery of the Toyota Corolla Verso
Toyota Corolla (2013-2019 / E160, E170, MK 4) If the key for your Toyota Corolla Verso is not working and the cause is a completely dead battery, the solution is simple and cost-effective. Below,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos